	Topaz 127	Topaz 147
Volume	127 L	147 L
Length	230 cm	230 cm
Width	82 cm	89 cm
OFO	58,8 cm	63,6 cm
Box	DeepTuttle Box	DeepTuttle Box
Aileron	Not provided – Recommended: 45 cm	Not supplied – Recommended: 49 cm
Weight	7,9 kg	8,8 kg

Key points

Navigation possible in aileron or foil
Careful cut out: Better fluid flow to optimize start time and speed.
Large tail : Allows more power on the foil
V long: Promotes high-speed navigation
High enough rail: Secures any touch points

Accessories

Board delivered with straps, screws.

Construction

The AHD Topaz uses an OSS PVC Carbon construction.

NAHSKWELL SKOOL - €899

Size

Model	Volume	Length	Width	Thickness	Weight	Aileron
Skool 9’5	140 L	290 cm	30″ 3/4	4″ 1/3	11,2 kg	Single 23 cm US
Skool 10′.	170 L	305 cm	31″ 3/4	4″ 1/3	13 kg	Single 23 cm US
Skool 10’5	190 L	320 cm	32″ 3/4	4″ 1/3	13,5 kg	Single 27 cm US
Skool 10’8	220 L	325 cm	32″ 1/3	5”	14 kg	Single 27 cm US

Key points

EVA full point
Long V : Provides manoeuvrability
Double concave: Improves glide
Rails with volume: Forgive the faulty supports

Construction

The NAHSKWELL SKOOL uses a construction: OSS Epoxy Wood.

NAHSKWELL GFOIL - €799

Size

	6’8	8’6
Volume	67 L	135 L
Length	203 cm	259 cm
Width	24″ 1/3	30″
Box	Twin FCS + Tuttle	Twin FCS + Tuttle
Weight	6,1 kg	8,5 kg

Key points

Large width : Quick start to surfing
Marked concave: Accelerates strongly

Construction

The NAHSKWELL GFOIL uses a construction: OSS PVC Carbon.

NAHSKWELL FIT

Size

Model	Volume	Length	Width	Thickness	Weight	Aileron
Fit 11′	220 L	335cm	30″ 3/4	5″ 1/3	12,3 kg	Single 27 cm US
Fit 12′	230 L	365cm	31″ 1/2	5″ 1/2	12,5 kg	Single 27 cm US

Key points

Long V on the hull: Provides manoeuvrability despite the length.
Bow marked : Splits the chop
Large: Versatile and accessible

Construction

The NAHSKWELL FIT uses a construction: OSS PVC Epoxy.

NAHSKWELL KOOL

Size

Model	Volume	Length	Width	Thickness	Weight	Aileron
Fit 11′	220 L	335cm	30″ 3/4	5″ 1/3	12,3 kg	Single 27 cm US
Fit 12′	230 L	365cm	31″ 1/2	5″ 1/2	12,5 kg	Single 27 cm US

Key points

Long V on the hull: Provides manoeuvrability despite the length.
Bow marked : Splits the chop
Large: Versatile and accessible

Construction

The NAHSKWELL FIT uses a construction: OSS PVC Epoxy.

FLUID NAHSKWELL

Size

Model	Volume	Length	Width	Thickness	Weight	Aileron
Nahskwell Fluid 11’6	150 L	350 cm	30″ 3/4	4″ 1/3	11 kilos.	Single fin (US) + 4 side boxes
Nahskwell Fluid 11’6 W+	170 L	350 cm	32″	4″ 3/4	11,2 kg	Single fin (US) + 4 side boxes

Key points

Long double concave on the hull
Long float: Provides better glide
Marked V: Increasing manoeuvrability

Construction

The NAHSKWELL FLUID uses a construction: OSS PVC Epoxy.

NAHSKWELL SNAP

Size

Model	Volume	Length	Width	Thickness	Weight	Aileron
Snap 8’5 – M	115 L	256cm	30″	4″	7,4 kg	Thurster FCS (Quad option)
Snap 8’5 Carbon – M	115 L	256cm	30″	4″	6,9 kg	Thurster FCS (Quad option)
Snap 8’5 – L	125 L	256cm	32″	4″	7,8 kg	Thurster FCS (Quad option)
Snap 8’5 Carbon – L	125 L	256cm	32″	4″	7,2 kg	Thurster FCS (Quad option)

Key points

Short V: provides manoeuvrability
Progressive double concave: Gives stability and speed of glide
Thruster FCS: Grip and handling in the surf

Construction

The NAHSKWELL Snap uses a construction: OSS PVC Epoxy or Carbon.

NAHSKWELL PRISM

Size

Model	Volume	Length	Width	Thickness	Weight	Aileron
Prism 7’8	108 L	236 cm	29″	4″	8,5 kg	Quad/Thruster FCS
Prism 7’8 – Carbon	108 L	236 cm	29″	4″	6,1 kg	Quad/Thruster FCS
Prism 8’2	120 L	248 cm	29″ 1/2	4″	9,3 kg	Quad/Thruster FCS
Prism 8’2 – Carbon	120 L	248 cm	29″ 1/2	4″	6,8 kg	Quad/Thruster FCS

Key points

Shape TOMO: Radical and reactive
Straight outline and moderate width: Provides stability
Double concave at the rear: Improves rail-to-rail passage

Construction

The NAHSKWELL Prism uses a construction: OSS PVC Epoxy or Carbon.

NAHSKWELL GET UP

Size

Model	Volume	Length	Width	Thickness	Weight	Aileron
Get Up 8’11	135 L	274 cm	30″ 2/3	4″ 1/3	9,7 kg	Tri-Fin FCS
Get Up 9’5	150 L	289 cm	31″ 1/4	4″ 1/4	10,4 kg	Tri-Fin FCSS

Key points

Simple progressive concave
Scoop tensed in the center

Construction

The NAHSKWELL Get Up uses a construction: OSS Wood Epoxy.

AHD COMPACT FOIL

Size

	72	83
Volume	126 L	142 L
Length	206 cm	210 cm
Width	72 cm	83 cm
OFO	58.2 cm	74.3 cm
Box	DeepTuttle Box	DeepTuttle Box
Aileron	Not provided	Not provided
Weight	8.2 kg	8,4 kg

Key points

Balanced compact outline: Minimal space requirement in flight, force consolidation towards the foil
Homogeneous volume distribution
Slightly retractable straight rails : Instantaneous rebound of the float in contact with water
Wide race deck: widened deck plan to offset the supports and increase the rider’s abseiling torque.
Long PDM rail: multiple position settings to suit all disciplines and sail surfaces
Multiple footstrap positions: Adapts to all rider styles and sizes.

Accessories

Board delivered with straps, strap screws, anti-twist washers and a carbon plate for hanging the foil.

Construction

The AHD Compact Foil uses a construction: OSS PVC Carbon.

AHD TACTIK

Size

	AHD Tactik
Volume	250 L
Length	320 cm
Width	76 cm
OFO	59 cm
Box	DeepTuttle Box
Aileron	Not provided
Weight	Seventeen pounds.

Key points

Rectangular wide size: Increases planning performance
V with nose bubble : Allows to slide quickly to the gîte
Strapless

Accessories

Board delivered with its full carbon daggerboard.

Construction

The AHD Tactik uses a construction: OSS PVC.

AHD SL3

Size

	AHD SL3 105	AHD SL3 115	AHD SL3 128
Volume	105 L	115 L	129 L
Length	231 cm	231 cm	229 cm
Width	67 cm	71 cm	81,5 cm
OFO	46,8 cm	51 cm	59.3 cm
Box	Tuttle Box	Tuttle Box	Tuttle Box
Aileron	Not supplied – Recommended: 31-40 cm	Not supplied – Recommended: 34-43 cm	Not supplied – Recommended: 38-50 cm
Weight	6,6 kg	6,8 kg	7 kg

Key points

Double Cut Out Tail: Increases Planning Performance
Flat at the rear evolving to double concave
Tense scoop line

Accessories

Board delivered with straps and screws.

Construction

The AHD SL3 uses an OSS Double Sandwich Carbon construction.

AHD FAST FORWARD

Size

	FF 117	FF 130	FF 145
Volume	117 L	130 L	145 L
Length	252 cm	253 cm	256 cm
Width	67,5 cm	72 cm	77 cm
Box	Powerbox	Powerbox	Powerbox
Aileron	Freeride 43 cm	Freeride 47 cm	Freeride 49 cm
Weight	9 kg	9,5 kg	10,5 kg

Key points

Long Board: Quick Schedule Take-off
Large single concave: Used to stabilize the board
Slightly flat sides

Accessories

Board delivered with straps, screws and a freeride fin.

Construction

The AHD Fast Forward uses an OSS Wood construction.

AHD EXPRESSION

Size

	Expression 75	Expression 85	Expression 95	Expression 105
Volume	75 L	85 L	95 L	105 L
Length	232 cm	234 cm	235 cm	237 cm
Width	56 cm	58,5 cm	61.1 cm	64 cm
OFO	34,8 cm	36,6 cm	38 cm	39,8 cm
Box	US Box + MT	US Box + MT	US Box + MT	Power Box + MT
Aileron	17 cm – 2x10cm	18 cm – 2x10cm	19 cm – 2x10cm	25 cm
Weight	6,7 kg	6,9 kg	7,1 kg	7,4 kg

Key points

Board with a little length: Quick start on the schedule
Good distribution of the scoop
V on the stern and concave on the hull
Navigation in Thrusters or Single
Reinforced and lightweight construction

Accessories

Board delivered with straps, screws and top-of-the-range fins.

Construction

The AHD Expression uses an OSS Double Sandwich Carbon Kelvar construction.

AHD ZEN

Size

	Zen 170	Zen 190	Zen 220
Volume	170 L	190 L	220 L
Length	270 cm	290 cm	295 cm
Width	79,5 cm	80,5 cm	90.0 cm
Box	Deep Tuttle Box	Powerbox	Powerbox
Aileron	30 cm (12 inches)	30 cm (12 inches)	30 cm (12 inches)
Weight	12,9 kg	14,5 kg	17,4 kg

Key points

Board entirely covered with pad and reinforced on the stressed parts (nose and rails)
Stable and easy board: High tolerance in learning manoeuvres
Can be mounted with AFS QUAD foil

Accessories

Board delivered with straps, screws.

Construction

The AHD ZEN uses an OSS Wood construction.

AHD THUNDERBOLT

Size

	THUNDERBOLT 75	THUNDERBOLT 85	THUNDERBOLT 91
Volume	130 L	145 L	165 L
Length	235 cm	226 cm	224 cm
Width	75 cm	85 cm	91 cm
OFO	61.1 cm	71 cm	87.2 cm
Box	DeepTuttle Box	DeepTuttle Box	DeepTuttle Box
Aileron	Not provided	Not provided	Not provided
Weight	8,6 kg	8,9 kg	9,9 kg

Key points

Double Cut Out Tail: Allows the float to be released faster on schedule
Longer board: Allows for less angle when touching the keys

Accessories

Board delivered with straps, screws.

Construction

The AHD Thunderbolt uses an OSS Double Sandwich Carbon construction.

WINDFOIL FREERIDE RANGE

Size

	F-770	F-1080
Span	700 mm	800 mm
Surface	770 cm2	1080 cm2
Target wind range	10 to 25 knots	8 to 20 knots
Maximum speed	> 26 knots	> 24 knots

Key points

Easy and accessible
Pronounced dihedral: Brings tolerance

Construction

Materials used: T700 (carbon), T800 (carbon)
Technology used: prepreg: 60% fibres/40% resin

Compatibility

The F range wings are compatible with 85 cm masts (94.5 cm fuselage) and 85, 95, 105 masts (88 cm fuselage – old generation).

STABILIZER WINDFOIL BOARDS

Size

	280	320
Envergure	470 mm	504 mm
Surface	280 cm2	320 cm2

Stabilizer Compatibility

Stabilizer 280 – Slalom & Racing range
Stabilizer 320 – Freeride range

Construction

Materials used: T700, T800
Technology used: prepreg: 60% fibres/40% resin

WINDFOIL SLALOM RANGE

Size

	S-670	S-740	S-840
Span	700 mm	720 mm	950 mm
Surface	670 cm2	740 cm2	840 cm2
Target wind range	15 to 30 knots	12 to 30 knots	8 to 20 knots
Maximum speed	> 30 knots	> 30 knots	> 26 kt

Key points

Wide usage range
Controlled power and stability
Precise and dynamic

Construction

Materials used: T700 (carbon), T800 (carbon)
Technology used: prepreg: 60% fibres/40% resin

Compatibility

The S range wings are compatible with 95 and 105 cm masts (fuselage 88 cm (old generation) and 94.5 cm).

AFS WINDFOIL RACING RANGE

Size

	R-660	R-810
Envergure	900 mm	1000 mm
Surface	660 cm2	810 cm2
Target wind range	12 to 30 knots	7 to 20 knots
Maximum speed	> 28 kt	> 26 kt

Key points

Large scope
Low string
Presence of wiglets

Construction

Materials used: T700 (carbon), T800 (carbon)
Technology used: prepreg: 60% fibres/40% resin

Compatibility

The R range wings are compatible with 95 and 105 cm masts (88 cm (old generation) and 94.5 cm fuselage).

AFS ALPHA RANGE CARVER

Size

	1200	1500	1700	2000
SPAN(mm)	809 mm	905 mm	961 mm	1050 mm
AREA(cm2)	1200 cm2	1500 cm2	1700 cm2	2000 cm2

Key points

Pronounced arrow: Maneuverability, optimized carving
Important rope: Low speed flight, tolerance
Exclusive thick profile: Load-bearing capacity, extended range of use
Full Carbon : French construction in Carbon sandwich Pre-preg

Construction

Materials used: T700 (carbon), T800 (carbon), Corcell foam 80 kg/m3
Technology used: prepreg: 60% fibres/40% resin

AFS ALPHA RANGE FLYER

Size

	1000	1300	1500
SPAN(mm)	840 mm	1000 mm	1050 mm
AREA(cm2)	1000 cm2	1300 cm2	1500 cm2

Key points

High Aspect Ratio: Advanced lift, front foot support, propelling pumping
Reduced chord: Strong accelerations, high revs, dynamism
Exclusive thick profile: Load-bearing capacity, extended range of use
Full Carbon : French construction in Carbon sandwich Pre-preg

Construction

Materials used: T700 (carbon), T800 (carbon), Corcell foam 80 kg/m3
Technology used: prepreg: 60% fibres/40% resin

AFS ALPHA TBAR

Size

Mast Size	72 cm	82 cm	92 cm
Assembly	Monobloc	Monobloc	Monobloc
Screws	Stainless steel	Stainless steel	Stainless steel
Fuselage	71 cm	71 cm	71 cm

Key points

3 mast sizes: 72, 82 and 92 cm
Multi-support : Surf Foil, Sup Foil, Wing Foil, Kite Foil, Windfoil
Maximum Compatibility: Accepts all kites and stabs in the range to cover all beaches and sailing styles
Square-section fuselage (71 cm): Precise and rigid wing docking
Fixed assembly: Weight saving, rigidity and reactivity
Full carbon: Maximum lightness, no corrosion, durability
Case: Deep Tuttle or US platinum – compatible with all cases on the market

Construction

Materials used: T700, T800 and UHM – Ultra High Modulus – carbon
Technology used: prepreg: 60% fibres/40% resin

AFS WINDFOIL TBAR

Size

Mast Size	85 cm	95 cm	105 cm
Assembly	Monobloc	Monobloc	Monobloc
Screws	Stainless steel	Stainless steel	Stainless steel
Fuselage	88 cm	94,5 cm	94,5 cm

Key points

3 mast sizes: 85, 95 and 105 cm
Optimized profile: Better glide, better control
Augmented rope: Directional stability
Optimised fuselage section: Gain in rigidity and glide
94.5 cm fuselage
Enlarged wing/fuselage docking area: rigid assembly

Construction

Materials used: T700, T800 and UHM – Ultra High Modulus – carbon
Technology used: prepreg: 60% fibres/40% resin

AFS ALPHA STABILIZER

Size

Model	250	260	310	350	440
Envergure	440 mm	480 mm	485 mm	480 mm	580 mm
Surface	250 cm2	260 sq. cm.	310 sq. cm.	350 cm2	440 cm2
Max rope	72 mm	65 mm	80 mm	92 mm	95 mm

Key points

2 types of stabilizer – 5 sizes : Tracer & Performer
Tracer (250, 310, 440): stability and tolerance
Performer (260, 350): dynamism and performance

Stabilizer Compatibility

Model	Flyer 1000	Flyer 1300	Flyer 1500	Carver 1200	Carver 1500	Carver 1700	Carver 2000
Trace 250	x	x	x	x	x	x
Tracer 310	x	x	x	x	x	x	x
Tracer 440		x	x	x	x	x	x
Performer 260	x	x	x	x	x	x	x
Performer 350		x	x		x	x	x

Construction

Materials used: T700, T800
Technology used: prepreg: 60% fibres/40% resin

SEALION CLASSIC

Size

Model	Volume	Length	Width	Weight
Sealion Classic 7’6	110 L	240 cm	74 cm	8,6 kg
Sealion Classic 8’3	135 L	256 cm	75 cm	9,9 kg
Sealion Classic 9’0	150 L	274 cm	75 cm	11,9 kg

Key points

Swiss knife board for SUP Freeride, SUP Waves and Windsurfing practice
Retro fish tail: Provides maneuverability
Tight outline and wide width : Gain in stability
Volume on the rail section: Provides tolerance and support in lower speeds

Construction

The Sealion Classic uses a Wood-Epoxy Sandwich One shot construction.

AFS WINDFOIL

Size

F Range	F-770	F-1080
Envergure	700 mm	800 mm
Surface	770 sq. cm.	1080 cm2
Target wind range	10 to 25 knots	8 to 20 knots
Maximum speed	> 26 kt	> 24 knots

S range	S-670	S-740	S-840
Envergure	700 mm	720 mm	950 mm
Surface	670 cm2	740 cm2	840 cm2
Target wind range	15 to 30 knots	12 to 30 knots	8 to 20 knots
Maximum speed	> 30 knots	> 30 knots	> 26 kt

R Range	R-660	R-810
Envergure	900 mm	1000 mm
Surface	660 cm2	810 cm2
Target wind range	12 to 30 knots	7 to 20 knots
Maximum speed	> 28 kt	> 26 kt

Stabilizer	280	320
Envergure	470 mm	504 mm
Surface	280 cm2	320 cm2

Mast Size	85 cm	95 cm	105 cm
Assembly	Monobloc	Monobloc	Monobloc
Screws	Stainless steel	Stainless steel	Stainless steel
Fuselage	88 cm	94,5 cm	94,5 cm

Key points

3 front fender ranges: Freeride | Slalom | Racing
2 stabilizer sizes: 280 & 320
3 mast sizes: 85, 95 and 105 cm

Stabilizer Compatibility

Stabilizer 320 – Compatible with F-series wings
Stabilizer 280 – Compatible with S and R series wings

Construction

Materials used: T700, T800 and UHM – Ultra High Modulus – carbon
Technology used: prepreg: 60% fibres/40% resin

AFS ALPHA

Size

Mat	72 cm	82 cm	92 cm
Assembly	Monobloc	Monobloc	Monobloc
Screws	Stainless steel A2 and A4	Stainless steel A2 and A4	Stainless steel A2 and A4

Carver	1200	1500	1700	2000
Surface	1200 cm2	1500 cm2	1700 cm2	2000 cm2
Envergure	809 mm	905 mm	961 mm	1050 mm

Flyer	1000	1300	1500
Surface	1000 cm2	1300 cm2	1500 cm2
Envergure	840 mm	1000 mm	1050 mm

Stabilizer	250	260	310	350	440
Envergure	440 mm	480 mm	485 mm	480 mm	580 mm
Surface	250 cm2	260 sq. cm.	310 sq. cm.	350 cm2	440 cm2
Max rope	72 mm	65 mm	80 mm	92 mm	95 mm

Key points

2 front fender ranges: Flyer & Carver
2 types of stabilizers – 5 sizes : Tracer(sliding and stabilizing) & Performer(dynamism)
3 mast sizes: 72, 82 and 92 cm

Stabilizer Compatibility

Model	Flyer 1000	Flyer 1300	Flyer 1500	Carver 1200	Carver 1500	Carver 1700	Carver 2000
Trace 250	x	x	x	x	x	x
Tracer 310	x	x	x	x	x	x	x
Tracer 440		x	x	x	x	x	x
Performer 260	x	x	x	x	x	x	x
Performer 350		x	x		x	x	x

Construction

These wings, masts and stabilizers use a FULL CARBON Prepreg T700 & T800 construction.

AFS WILF

Size

The WILF is available in 4, 5 and 6 m2.

Key points

Ultra rigid canopy: Allows for a wide range of use
Compact design: Less space required for navigation
Easy to use: 3 handles at your disposal
Pumping performance

Construction

Manufactured with Teijin T9669 spinnaker with the use of Ripstop (fabric made in a more or less large mesh by arrangement of warp and weft threads which reinforces the structure of the spinnaker – avoids during a snag the extension of the tear)
Reinforcements on the leading edge for abrasion resistance

Accessories

Sold with leash, dynema backpack and repair kit

SEALION SAILS

Size

Model	Mast	Luff	Boom	Weight
Sealion Sail 5.0 m	SDM or RDM / 430 or 400	429 cm	175 (SDM) – 177 (RDM)	1,6 kg
Sealion Sail 5.5 m	SDM or RDM / 430 or 400	441 cm	186 (SDM) – 188 (RDM)	1,8 kg

Key points

Wide range of use
Reinforced sail
Ultralight weight
Option footstraps first planning
Radical wave sail with 3 battens – lower part with floating 2/3 batten

Construction

The Sealion Sail is made of Dacron.

SEALION SUMMERBOARD

Size

Model	Volume	Length	Width	Weight	Box
Sealion Summerboard 10	200 L	295 cm	84 cm	15 kg	Fins
Sealion Summerboard 9′.	150 L	274 cm	75 cm	11,9 kg	Deep Tuttle + Fins

Key points

Full pad EVA
Retractable daggerboard
Foil compatible with the AFS QUAD
Option footstraps first planning
Tandem option: Mast foot insert to practice in tandem with your child

Construction

The Sealion Summerboard uses a Sandwich Wood-Epoxy One shot construction.

SEALION WINGS

Size

Model	Volume	Length	Width	Weight
Sealion Wings 7’6	112 L	240 cm	74 cm	8,7 kg
Sealion Wings 8’6	130 L	259 cm	76 cm	9,4 kg

Key points

Swiss knife board for Wing Foil, SUP Foil, Windsurfing, Windfoil and SUP practice.
Retro fish tail: Provides maneuverability
Adjustable mast foot
Straight and simple concave outline: Provides more stability, speed and radicality
Thinner Rails: Provides maneuverability in the surf
Double US and/or Deep Tuttle rails

Construction

The Sealion Wings uses a Sandwich Carbon One shot construction.

NAHSKWELL FLY - €1,145

Size

Model	Volume	Length	Width	Weight	Aileron
Fly 5’6	48 L	167 cm	20″1/2 \| 52 cm	5,7 kg	Double US
Fly 5’3	95 L	160 cm	27″1/2 \| 69 cm	6,5 kg	Double US
Fly 5’10	102 L	178 cm	28″ \| 71 cm	7 kg	Double US
Fly 6’2	110 L	189 cm	27″ \| 68.5 cm	7,3 kg	Double US
Fly 6’6	125 L	– cm	29″ 1/2 \| 74 cm	– kg	Double US

Key points

Compact Shape: Reactivity, dynamism, control
Outline TOMO: Touch and Go” stability and restart
Optimised hull: Double concave, cleverly proportioned at the front, evolving flat at the back.
Chamfered Rails: Optimized Carving
Skateboard Tail Kick : Extra thickness at the end of the pad for easy take-off and pumping at low rpm.
Multiple footstrap positions: Choice of ride position on the foil, tight Y on the front

Construction

The NAHSKWELL FLY uses a construction: OSS PVC Carbon. A process that results in a perfect balance between strength and lightness with maximum respect for the original shape.